|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Slotting cutter arbors will work with any slotting cutter with a 5/16"" arbor. Use on hand held and table mounted portable routers."
|
Slotting cutter arbors will work with any slotting cutter with a 5/16 in arbor. Use on hand held and table mounted portable routers.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micro grain carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. For use in cutting slots, the three-wing cutter is used for better cut finish. The fully hardened and tempered steel shank provides ultimate durability.
|
Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produce a precision slot for T-moldings, spline joints or many other applications. Bodies are heat treated for strength and are computer balanced for vibration-free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks and 60-102 for these cutters are a fast, efficient way to rout slots and grooves for T-moldings, spline joints, tongue/groove joints and many other applications. Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks, 60-102 for 1/2 in shanks and 62-108 bearing.
|
|
|
|
