Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Sort By:
1 2 3 ... 5
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape Harvey's 043010 Plumbers Putty
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands.
Harvey's 023015-48 Pipe Joint Compound Harvey's 017252-144 Pipe Thread Seal Tape Harvey 030005-144 Pipe Thread Compound
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS.
Oatey 31166 Plumbers Putty Oatey 31229 Great White Harvey's 044010 Epoxy Putty
Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Harvey's 017165-144 Pipe Thread Seal Tape Oatey 31403 Gas Line Thread Tape Harvey's 039300 Gas Leak Detectors
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to +160 degrees Fahrenheit. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin.
Oatey 31402D Water Line Thread Seal Tape Oatey 30779 All Purpose Pipe Cleaner Rectorseal 55910 PVC/CPVC Primer/Cleaner
Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can.
Oatey 30999 ABS Cement Harvey's 017065 Pipe Thread Seal Tape Oatey 31012 PVC Cement
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
Harvey's 029035 Pipe Thread Compound Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Oatey 30755 PVC/CPVC Primer
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656.
Harvey's 018100-24 P-4 Oatey 30890 Rain-R-Shine Plumb Pak PP854-2 Pipe Joint Compound
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing
Oatey 30883 PVC Cement Harvey's 019050-24 PVC/CPVC Purple Primer Rectorseal 25790 Pipe Thread Sealant
Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
   
 
1 2 3 ... 5