|
|
|
|
|
|
|
|
|
|
|
|
|
|
For exterior scaffolding. Meets ANSI, CSA and OSHA standards. 1-1/2 in x 3 in.
|
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold METALTECH coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in.
|
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1-5/8 in. tube OD frames. Meets OSHA standards for safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
|
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
|
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
|
Providing a complete range of roof brackets, Qualcraft offers fixed and adjustable roof brackets for all roof pitches and materials including slate. Durable, easy-to-install and remove and designed to protect all roof surfaces, Qualcraft is the only name you'll need to remember for professional roofing tools. Capacity is one worker plus 40 lb/8 ft staging. Maximum of 8 ft of spacing between brackets.
|
The adjustable roofing bracket attaches to the our pump jack system to offer a sturdy, flat surface to stand on while roofing or working at heights. The bracket features a durable all-steel construction with an adjustable 6 in or 10 in platform. This product is designed to be used with 2 in x 6 in or 10 in planks, the bracket allows for easy installation and removal without damaging shingles. Already compliant with OSHA regulations, it is recommended to use at least on bracket per every 8 ft of spacing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets ANSI, CSA and OSHA standards.
|
Meets ANSI, CSA and OSHA standards.
|
The casters can swivel and rotate 360 degrees, which makes moving and turning the scaffold easy. Smooth and quiet operation. Perfect for industrial applications, such as warehousing, delivery, medical devices, factories, and so on.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30-1/4 x 20 x 2-3/4 in.
|
Meets ANSI, CSA and OSHA standards.
|
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in OD galvanized steel tube, 16 ga Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With hollow plate. Meets ANSI, CSA and OSHA.
|
METALTECH Cross Brace, Steel, Galvanized, Dimensions: 2 x 7 ft
|
Meets ANSI, CSA and OSHA standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The guardian fall protection 2-rung ladder jack is MIG welded and possesses a riveted construction for excellent strength and durability. It is setup over 2 consecutive ladder rungs, can be used on either side of a ladder and is ideal for painting, siding and repair applications. This jack is easy to both install and remove and will even accommodate planking up to 18 in wide when used in combination with a paired Ladder Jack and installed and used in accordance with all applicable OSHA regulations.
|
Meets ANSI, CSA and OSHA standards.
|
This multi-use scaffolding unit can provide additional stability and extend the width of the scaffold base, giving you options to enhance your safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel construction. Adjustable to any height up to 30 ft. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a positive double lock system. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781.
|
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder-coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
|
The AP-25 Pro work platform has a large work surface, EASY-GRAB handles (Patent Pending) and slim-fold dual locking legs to work quickly and safely from side to side. The new EASY-GRAB Handles allow you to transport the work platform in one hand while holding supplies in the other. The slim fold dual locking legs securely lock when the legs are open for safety and lock again when closed for easy transport and storage. The higher 300lb load capacity means you can carry more with you to get the job done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Assembled dimension of 19-1/4 in x 4-1/2 in x 24 in, weighs 33 lb. 5 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
|
Includes sliding locks for securing. 5/8 in plywood. Meets ANSI, CSA and OSHA standards.
|
METALTECH Platform, 27.5 lb Weight, Aluminum, 7 ft L, 19 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in H stem, they do not clamp. Use with locking pin.
|
Assembled dimension of 21-1/2 in x 4 in x 26-1/2 in, weighs 52 lb. 6 in double locking heavy-duty casters. Includes four outriggers, four casters and 12 locking pins. Compatible with I-BMSS. Meets ANSI, CSA and OSHA standards.
|
The ScaffLock? is an easy to activate braking system for safe use while standing at working height on a baker style scaffold. The easy install system makes it simple and quick to install. The adjustable spring loaded locking system helps adapt to any floor surfaces and caster sizes. Large rubber feet provide stability on any floor surface.
|
|
|
