|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
|
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
|
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
|
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
|
Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings.
|
|
|
|
|
|
|
|
|
|
|
|
|
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
|
Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Mueller Coil Tubing, Short, 1/4 in Nominal Size, 10 ft Length, Copper, For General Purpose
|
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with non-potable water.
|
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
|
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
|
|